Purchased TOTAL INSULATION

I found your product very easy to work with and does exceptional job of insulating on my house which is totally in suns view. I've noticed I can open windows and still be comfortable with the inside temp. Glad I took the time to research on web and found you.

Thank you,
Mrs. Middlebrook

Purchased TOTAL INSULATION

I finally completed my 60" X 42" steel building using your insulation between the steel studs and the metal sheeting. I was amazed at the temperature difference. The metal is not allowed to adversly heat the building and the temperature is cooler than under a shade tree because of the breeze created within the door openings. The reflective foil also provides a tremendous amount of light reflection inside the building creating a very bright look inside.

I am amazed and presently surprised that the thin foil actually worked so well.

Thanks,
William E. Matthews

Purchased TOTAL INSULATION

Dear Insulation4Less,

My name is David. I am the Warehouse Manager for Schlossadler Wines, Inc. We are an international boutique wine distributor with a 9,300 sq. ft. warehouse in Oceanside, CA. Approximately one month ago the owner of the company (my boss) came to me with the task of researching, ordering, and installing insulation for the ceiling of the entire building by myself. With limited experience in this particular area under my belt, I accepted the project anyway. I honestly didn't even know where to start. I sent detailed photos along with our information and questions to your sales team. They replied promptly with very easy instructions and recommendations as to "what type" and "how much" product should be ordered to complete our mission. Now, one month and about 200 hours later, my boss is extremely happy, our stock is cool, and I've received a very generous bonus!!

Thanks Insulation4Less, I will definitely spread around the words: "foil-foam-foil!"

Sincerely,
David W.
Warehouse Manager
Schlossadler Wines, Inc.
Oceanside, CA

Purchased TOTAL INSULATION

Dear Insulation4Less,

My contractor had never done IR barrier before. By the end of the job, they were standing in the house to get out of the heat. "It's COOL in here. I Like this stuff." was their comment.

Sincerely,
Chris P.

Purchased TOTAL INSULATION

Dear Insulation4Less,
The sales rep for 123 Exteriors is coming to visit me, they are the guys that used your product to wrap my house prior to vinyl siding over. My insurance claims person at State Farm has paid the full amount of the estimate because it was believed to be an upgrade equal to aluminum siding.

I'm telling 123 that they can sell up as an upgrade and use me as testimony. Tyvek may wrap your home against wind but Prodex wraps your home against all major climate changes and high wind. Good Stuff, my home is very comfortable,… I'd be happy to represent your team.

Sincerely,

John Mayeux

Hanover Park, Il

Purchased TOTAL INSULATION

Dear Insulation4Less,
I am Danny Skellett. I am replying to you and my present and past uses of Protex Total Insulation.

Number one when I have order Prodex Total Insulation from your company on line it has arrived in excellent condition and in a timely matter, both please me as a costumer very much.

My house was cheaply built in 1972 using 2" x 4" stud construction. I purchase the house in 1991. Since I have owned the house we have slowly remodeled. In the meantime our utility bill was always high. We started to look at energy saving ways to insulate our home as well as install energy saving appliances. Last year I took a close look at the energy saving act and local building requirements for new built homes. Everything I got information on state 2" x 6" stud construction with updated insulating R values. Started in the attic. I had inefficient attic insulation. I knew my outside walls were not efficient. So I started looking into different ways to insulate the house and when searching on line I came across your product. My initial goal was to maximize insulating the house the most efficent and easiest way. I liked the insulating R values your Prodex Total stated. I installed the Prodex Total to the bottom of my roof rafters, keeping the air flow in mind, then I laid new rolled insulation over the ceiling rafters. My attic had intially an insulating R value of R-13. With installing Prodex Total and R-38 rolled attic insulation, I figured I now have insulating R value of R-65.5 for up loss and an insulating R value of R-58.5 for down loss. Huge difference to the comfort of the home. The addition of your Prodex Total to my attic allowed me to bring my 2" x 4" stud constructed house attic insulating R value to match and exceed 2" x 6" stud constructed insulating R values. The $250.00 was well spent and I am receiving my money back through lower utility bills. Now we ready to put new vinyl siding on the exterior of our home. Goal to incease the insulating R value of our exterior walls from 2" x 4" stud construction to 2" x 6" stud construction without major reconstruction cost. Geeting it done efficently and cheaply, as well as, minimize labor. Again Prodex Total is the answer. Our exterior walls started with R-13 rolled insulation with R1.5 black felt board with aluminum siding as a outter cover. Giving a exterior insulating R value of R-14.5. The goal was to reach R-19 or better. I ordered more rolls of Prodex Total and received them today. We are going to remove all original aluminium siding and black felt board and replace any damged or sagging R-13 rolled insulation. Then install Prodex Total over the studs. Then install 3/4" x 2" firring strips over the stud locations and cover this with 3/4" insulation foam board. Then install 1/2" OSB board for an otter covering. Instead of plastic house wrap as a wind barrier to the outter layer we are using heavy duty tar paper as a wind barrier and then install the vinyl siding. Yes we are reinsulating the windows and doors to block the wind. To my calulations with this install process we will take our original insulating R value from R-14.5 to a value of R-25 far exceeding the R-19 for 2" x 6" stud wall construction. My calculation to reach an insulating R value of R-25 was R-13 rolled insulation + R-8.5 for Prodex Total for vertical application + R-3 for insulating foam board + R-0.5 for outter covering. Bringing a Total of R-25. Again the use of Prodex Total will be the difference.

Thank you,

Danny Skellett

Purchased TOTAL INSULATION

I did a lot of research on the net: I am a retired electro-mechanical engineer. I know what I wanted to do, but did not know exactly how to achieve it; until I contacted Insulation4less. The sales person on the phone was really nice, and very knowledgeable about my re-roof project. I am not a roofer; this was a project with a few friends; and a weekend.

I'm really sorry I did not take any pictures. The old, (I know before 1900) house's tin roofing was removed revealing open purlins. The "double bubble" (He actually purchased High R (FfmF) Foil/Foam/foil) insulation was tacked loosely draped just prior to installing each sheet of new tin. It was inexpensive (per r-value), easy, and fast to install. It really smoothed out the old warped wood, giving it a very nice appearance.

After being installed in August of 04, in east Ohio, I noticed an immediate drop of several degrees upstairs. This winter it is really warmer without the gas bill going up at all, compared to last year. The old attic already had about 19-12 inches of cellulose, which I had blown in about 1980, so I really had time to experience the difference between old and new. I really believe this product has paid for itself already....

Sincerely,

Dave Davenport
Powhatan Point, OH

Purchased TOTAL INSULATION

Metal building:

I HAVE INSTALLED YOUR PRODEX PRODUCT IN THE ROOF MY 24 X 30 METAL GARAGE. I ALSO ADDED AN EXHAUST FAN IN THE GABLE. THE WALLS ARE 10FT AND SO FAR WITH HIGHS GETTING NEAR 90 I CAN SEE A VAST IMPROVEMENT OVER LAST SUMMER WHEN THE BUILDING WAS NEW.

AUSTIN GILES

SAINT GEORGE, GEORGIA

Hi folks,
Attached you should find several pictures of your poly/bubble/foil insulation that we used as part of our in-floor heat system. This was installed in our 5000 sq ft shop in Loma, CO. We have been very pleased thus far. Steve & Karen Mayes, A-Mayes-Ing Wood, Loma, Co

With just one layer up I've already noticed a very significant decrease in heat in the summer and warmth in the winter. Margaret Denial, Cotati Ca

Installing RBWP over gravel prior to pouring 5" concrete in 4,000 square foot shop floor. David Rees, Thayne, Wyoming