Purchased TOTAL INSULATION

We recently used your product Prodex to insulate our warehouse in southern California. We occupy a 3,500 square foot block building with a flat roof. For the past two years the summer heat literally made it impossible to work in the space.
This spring we stapled Prodex to the rafters, creating a 12" dead air space and installed just two rotating vents to get warm air off the ceiling.
We now enjoy a space that visitors think is air conditioned. On hot days the temperature differential from outside to inside has exceeded 15º.
In every way, your product exceeded our expectations.

Thanks!!!!
Robert Rasner

Purchased TOTAL INSULATION

Hi. I just wanted to say thank you. I received my insulation (foil-foam-foil) yesterday and it’s already installed. It only took me a couple hours to complete by myself. It was so easy to work with. I installed it in my chicken coop in the ceiling. I can’t wait to see how it does when we get some low temperatures. I have been using a panel heater on the wall and the heat just rises right up and out through the roof. Hopefully this will help keep some of that heat in. The other benefit is how the light coming in the windows is reflected back into the barn. The foil really brightened it up in there. So I thank you and my chickens thank you.

P.S. Your insulation was recommended by another chicken mother. She installed your foam-bubble-foam insulation in her coop 2 years ago and is very happy with the performance. A specific concern for chicken coops is to keep down excess moisture and mold. She has had no problem with moisture since installing the insulation.

Sincerely,
Jill Trainor

Purchased TOTAL INSULATION

I am sending you two photos----One is before installation of metal sheeting, the other is during the process. We build our roof completely on the floor, the pick them up and set them, thereby eliminating any 'acrobatics' up in the air. The best advise I can give anyone, is to do all the work and preparation that you can while the parts are still easiest to work with --- on the floor, rather than trying to complete their work under stained conditions, later. Pull the foil and hand tighten it, and do not use any fasteners that are not absolutely necessary, thereby eliminating any extra places for water to come in, giving a good water protection barrier. Thanks, Jim Masdon

Purchased TOTAL INSULATION

My two-car garage used to get quite hot in the summer reaching 100 degrees or more and staying hot well into the evening. An externally ventilated exhaust fan was of little help. Three of us spent about three hours installing insulation. Now the garage stays 15 to 20 degrees cooler in the summer with little or no use of the exhaust fan.

Michael Levin
Denver, CO

Purchased TOTAL INSULATION

Just wanted to let you know your product, FfmF, that I purchased last year, works absolutely SUPERIOR. I will have more projects next year, and will definitely be ordering more product from you.

THANK YOU SO MUCH
Susan

Purchased TOTAL INSULATION

1st time I used Prodex. The 1300 sq.feet attic was 36" High at the highest point. The framers were off by up to 1"spacing the rafters. 48" width didn't make it some places.

The attic became cooler as I progressed with job. Big difference, I loved it.

The leftovers I'll use for my cars and for camping. I am recommending Prodex to everybody I know. Easy to cut, to shape, to install. No itching fiber. That attic would be hard to insulate with standard 6"glass fiber.

I am glad I found you. Thanks

ILJA MARAN, Santa Monica, Ca

Purchased TOTAL INSULATION

Hi, attached is the picture of the duct works. It's been quite an experience working on the duct insulation. Just some words of advise for those that are working on the duct insulation for the first time like me. Before you applying any insulation to your ac/heater duct system, make sure you are applying a sealing material (duct sealed) first. Then, you can apply the High R insulation, duct wrap. It works very well for me. While the heater/AC is running, the thermostat needle is going up/down faster before the duct works was insulated. High R insulation is very easy to apply since there is no need to wear respiratory gear. The higher the R value the better it will be for your central AC/heater system. Anyway, the attached files are pictures of the before and after duct works insulation.

Ming Lo
Norcross, GA

Purchased TOTAL INSULATION Foil Foam Foil (FfmF)

This is Gary…
I had used the double sided foil to insulate my barn.
Upper and lower floors.
It has a concrete lower floor 36' x 36'. The upper loft is 15' x 36' with 9 foot ceilings.
When it is a cold 27 out, it's a constant 43 to 45 in the lower level.
I purchased the 4' rolls by 100ft. or so. My studs were 24" apart so I cut the rolls in half.
I like the clean simplicity of the installation. I used 1/2" x 1/2" staples.

Gary Lewo
Squaw Valley, CA